| Mfg Part Number: CM-23694 | Alternate P/N: CM23694 | NSN : 5905-00-052-6959 |
| NIIN : 000526959 | CAGE Code : 12697 | Manufacturer: Clarostat Sensors And Controls |
| Item Name : Resistor Variable Wire Wound Non | FSC : 5905 Resistors |
Thank you for your interest in NSN Part CM-23694 under NSN 5905-00-052-6959 with 000526959 featured on After Market Aero Spares. On this page, entities may request a quote for their comparisons on Resistor Variable Wire Wound Non items by Clarostat Sensors And Controls with the CAGE Code 12697 or begin the purchasing process through the submission of a completed RFQ form. This entails providing details regarding one’s desired part quantities, target prices, estimated shipping time frames, and more, as applicable. Upon submitting a completed form for NSN Part CM-23694 with 5905 Resistors our representatives will utilize their market prowess to supply you with a personalized quote backed by rapid lead times and cost savings in just 15 minutes or less.
Proudly operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, After Market Aero Spares also operates with a strict NO CHINA Sourcing pledge, ensuring all products purchased are shipped in tandem with their applicable manufacturer trace documentation or qualifying certifications. Dedicated to only supplying premium NSN Part CM-23694 of the highest caliber, experience the simplicity of After Market Aero Spares when you are on the market for specific Clarostat Sensors And Controls today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-052-6959 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 000526959 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM-23694 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM" |
| ABHP | III OVERALL LENGTH | 1.726 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.257 INCHES MINIMUM AND 0.280 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 1.446 INCHES MAXIMUM" |
| ADAV | III OVERALL DIAMETER | 1.035 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 0.8600 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 286.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.002 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 201.0 OHMS 3RD SECTION" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 1ST SECTION" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 2ND SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 343.0 MINIMUM AND 354.0 MAXIMUM" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 200.0 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 1ST SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 2ND SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 3RD SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 TURRET" |
| AAPN | SECTION QUANTITY | 3" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM" |
| ABHP | III OVERALL LENGTH | 1.726 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.257 INCHES MINIMUM AND 0.280 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 1.446 INCHES MAXIMUM" |
| ADAV | III OVERALL DIAMETER | 1.035 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 0.8600 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 286.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.002 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 201.0 OHMS 3RD SECTION" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 1ST SECTION" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 2ND SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 343.0 MINIMUM AND 354.0 MAXIMUM" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 200.0 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 1ST SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 2ND SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 3RD SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 TURRET" |
Warrantied inventory at competitive prices
Search the world’s largest inventory of electronic components by manufacturer, category or part number
We sell only warrantied and traceable parts
All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
