| Mfg Part Number: 2900L-503 | Alternate P/N: 2900L503 | NSN : 5905-00-851-2402 |
| NIIN : 008512402 | CAGE Code : 96791 | Manufacturer: Bunker Ramo Corp Amphenol Controls Div |
| Item Name : Resistor Variable Wire Wound Non | FSC : 5905 Resistors |
Thank you for your interest in NSN Part 2900L-503 under NSN 5905-00-851-2402 with 008512402 featured on After Market Aero Spares. On this page, entities may request a quote for their comparisons on Resistor Variable Wire Wound Non items by Bunker Ramo Corp Amphenol Controls Div with the CAGE Code 96791 or begin the purchasing process through the submission of a completed RFQ form. This entails providing details regarding one’s desired part quantities, target prices, estimated shipping time frames, and more, as applicable. Upon submitting a completed form for NSN Part 2900L-503 with 5905 Resistors our representatives will utilize their market prowess to supply you with a personalized quote backed by rapid lead times and cost savings in just 15 minutes or less.
Proudly operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, After Market Aero Spares also operates with a strict NO CHINA Sourcing pledge, ensuring all products purchased are shipped in tandem with their applicable manufacturer trace documentation or qualifying certifications. Dedicated to only supplying premium NSN Part 2900L-503 of the highest caliber, experience the simplicity of After Market Aero Spares when you are on the market for specific Bunker Ramo Corp Amphenol Controls Div today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-851-2402 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008512402 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 855-009-001 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.075 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.030 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | SLEEVE" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM" |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM" |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED" |
| CBME | III CUBIC MEASURE | 0.054 CUBIC INCHES" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | III PRECIOUS MATERIAL | GOLD" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.075 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.030 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | SLEEVE" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM" |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM" |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED" |
| CBME | III CUBIC MEASURE | 0.054 CUBIC INCHES" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | III PRECIOUS MATERIAL | GOLD" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
Warrantied inventory at competitive prices
Search the world’s largest inventory of electronic components by manufacturer, category or part number
We sell only warrantied and traceable parts
All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
