| Mfg Part Number: D10-09-112 | Alternate P/N: D1009112 | NSN : 5905-00-865-9284 |
| NIIN : 008659284 | CAGE Code : 99957 | Manufacturer: Bowmar Instrument Co |
| Item Name : Resistor Variable Wire Wound Pre | FSC : 5905 Resistors |
Thank you for your interest in NSN Part D10-09-112 under NSN 5905-00-865-9284 with 008659284 featured on After Market Aero Spares. On this page, entities may request a quote for their comparisons on Resistor Variable Wire Wound Pre items by Bowmar Instrument Co with the CAGE Code 99957 or begin the purchasing process through the submission of a completed RFQ form. This entails providing details regarding one’s desired part quantities, target prices, estimated shipping time frames, and more, as applicable. Upon submitting a completed form for NSN Part D10-09-112 with 5905 Resistors our representatives will utilize their market prowess to supply you with a personalized quote backed by rapid lead times and cost savings in just 15 minutes or less.
Proudly operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, After Market Aero Spares also operates with a strict NO CHINA Sourcing pledge, ensuring all products purchased are shipped in tandem with their applicable manufacturer trace documentation or qualifying certifications. Dedicated to only supplying premium NSN Part D10-09-112 of the highest caliber, experience the simplicity of After Market Aero Spares when you are on the market for specific Bowmar Instrument Co today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-865-9284 Item Description: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008659284 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D10-09-112 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 3.060 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 0.880 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 2.440 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.300 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEGA | LATERAL RUNOUT | 0.001 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3780.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05/+0.05 ALL SECTIONS" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 OHMS ALL SECTIONS" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 10000.0 2ND SECTION" |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 3333.0 1ST SECTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS" |
| TEST | TEST DATA DOCUMENT | 06481-900217-227 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D" |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TURRET" |
| AAPN | SECTION QUANTITY | 2" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 3.060 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 0.880 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 2.440 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.300 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEGA | LATERAL RUNOUT | 0.001 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3780.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05/+0.05 ALL SECTIONS" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 OHMS ALL SECTIONS" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 10000.0 2ND SECTION" |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 3333.0 1ST SECTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS" |
| TEST | TEST DATA DOCUMENT | 06481-900217-227 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D" |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TURRET" |
Warrantied inventory at competitive prices
Search the world’s largest inventory of electronic components by manufacturer, category or part number
We sell only warrantied and traceable parts
All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
