| Mfg Part Number: 7609-1417-0 | Alternate P/N: 760914170 | NSN : 5905-00-140-0206 |
| NIIN : 001400206 | CAGE Code : 73138 | Manufacturer: Bi Technologies Corporation |
| Item Name : Resistor Variable Wire Wound Nonprecision | FSC : 5905 Resistors |
Thank you for your interest in NSN Part 7609-1417-0 under NSN 5905-00-140-0206 with 001400206 featured on After Market Aero Spares. On this page, entities may request a quote for their comparisons on Resistor Variable Wire Wound Nonprecision items by Bi Technologies Corporation with the CAGE Code 73138 or begin the purchasing process through the submission of a completed RFQ form. This entails providing details regarding one’s desired part quantities, target prices, estimated shipping time frames, and more, as applicable. Upon submitting a completed form for NSN Part 7609-1417-0 with 5905 Resistors our representatives will utilize their market prowess to supply you with a personalized quote backed by rapid lead times and cost savings in just 15 minutes or less.
Proudly operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, After Market Aero Spares also operates with a strict NO CHINA Sourcing pledge, ensuring all products purchased are shipped in tandem with their applicable manufacturer trace documentation or qualifying certifications. Dedicated to only supplying premium NSN Part 7609-1417-0 of the highest caliber, experience the simplicity of After Market Aero Spares when you are on the market for specific Bi Technologies Corporation today!
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.74900 INCHES MINIMUM AND 0.75000 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.06250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.968 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.06250 INCHES NOMINAL |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.532 INCHES MINIMUM AND 1.594 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 4.281 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.000 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.00000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.09375 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 2.60 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.80 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 550.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS ALL SECTIONS |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 2666.0 1ST SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 2666.0 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3636.0 MINIMUM AND 3641.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG |
Warrantied inventory at competitive prices
Search the world’s largest inventory of electronic components by manufacturer, category or part number
We sell only warrantied and traceable parts
All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
