| Mfg Part Number: 200C | NSN : 5905-00-610-0551 | NIIN : 006100551 |
| CAGE Code : 02297 | Manufacturer: Ace Electronics Inc | Item Name : Resistor Variable Wire Wound Pre |
| FSC : 5905 Resistors |
Thank you for your interest in NSN Part 200C under NSN 5905-00-610-0551 with 006100551 featured on After Market Aero Spares. On this page, entities may request a quote for their comparisons on Resistor Variable Wire Wound Pre items by Ace Electronics Inc with the CAGE Code 02297 or begin the purchasing process through the submission of a completed RFQ form. This entails providing details regarding one’s desired part quantities, target prices, estimated shipping time frames, and more, as applicable. Upon submitting a completed form for NSN Part 200C with 5905 Resistors our representatives will utilize their market prowess to supply you with a personalized quote backed by rapid lead times and cost savings in just 15 minutes or less.
Proudly operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, After Market Aero Spares also operates with a strict NO CHINA Sourcing pledge, ensuring all products purchased are shipped in tandem with their applicable manufacturer trace documentation or qualifying certifications. Dedicated to only supplying premium NSN Part 200C of the highest caliber, experience the simplicity of After Market Aero Spares when you are on the market for specific Ace Electronics Inc today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-610-0551 Item Description: Resistor Variable Wire Wound Pre | 5905 | 006100551 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 200C | 6 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8745 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.703 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 2.093 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.938 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 2.346 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.9850 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 10001-1578127 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8745 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.703 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 2.093 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.938 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 2.346 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.9850 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 10001-1578127 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
Warrantied inventory at competitive prices
Search the world’s largest inventory of electronic components by manufacturer, category or part number
We sell only warrantied and traceable parts
All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
